Pdf Direct Printing - Xerox WorkCentre 7132 User Manual

Parameter
Staple
Manual
Feed Tray
Check
Indicator
Pen Width
(No. 0–15)
Line End
Shape
(No. 0–15)
Line
Intersects
(No. 0–15)
Pen Color
(No. 0–15)

PDF Direct Printing

Parameter
Print Sets
2 Side Print
Xerox WorkCentre 7132 User Guide
Item No.
164 0: None (Default)
1: Top left
2: Top double
3: Top right
4: Left double
5: Right double
6: Bottom left
7: Bottom double
8: Bottom right
9: Center
Sets the stapling position.
165 0: None
1: Yes (Default)
Sets the manual feed tray indicator.
800– 0-255: 0 to 25.5 mm (3: Default)
815
Sets the width of the pen in 0.1 mm units.
850– 0: Cut (Default)
865 1: Round
2: Rectangular
Sets the line end shape.
900– 0: None (Default)
915 1: Intersect
2: Round
3: Cut
Sets the line intersect shape.
950– 0-255: Color
965 0-100: Black and white
Sets the color density. The smaller the number, the lighter the color.
Item No.
1-999 (Default: 1): Specify the number of print sets.
401
0
402
: Off (Default)
1: LEF Binding
2: SEF Binding
Specifies which edge of paper is to be bound for double-
sided printing.
Emulation Parameters
Value
Value
163