Network Settings; Port Settings - Xerox WorkCentre 7132 User Manual

10 Setups

Network Settings

This section describes the features that allow you to change the default settings for the
network configuration. For more information on network setups, refer to the System
Administration Guide. For more information, refer to the following.
NOTE: The options available may vary with the usage environment.
Port Settings – page 248
Protocol Settings – page 250
Machine's E-mail Address/Host Name – page 251
Proxy Server Settings – page 252
Outgoing/Incoming E-mail Settings – page 253
Remote Server/Directory Service – page 255
PKI (Public Key) Settings – page 259
Other Settings – page 261
1.
Select [Network Settings] on the
[System Settings] screen.
2.
Select the required option.
3.
Select [Close].

Port Settings

This feature allows you to set print mode, port status, communication mode, and auto
eject time for the communication ports.
1.
Select [Port Settings] on the
[Network Settings] screen.
2.
Change the required settings.
Use the scroll bars to switch
between screens.
3.
Select [Close].
USB
Specifies whether to enable the USB port and to configure the relative parameter
settings.
Port Status
Specifies whether to enable the USB port.
Print Mode
Specifies the PDL to be used for print jobs. Only pre-installed PDLs are available.
248 Xerox WorkCentre 7132 User Guide