Xerox WorkCentre 7132 User Manual page 408

15 Problem Solving
Code
016-728
016-729
016-731
016-732
016-733
016-734
016-735
016-736
016-737
016-741
016-742
016-744
016-745
016-746
016-747
016-748
408
The TIFF file contains unsupported tags. Check the print data.
The TIFF file could not be printed, because the number of colors and resolution
of the TIFF file exceeded the limit. Change the number of colors and resolution
of the TIFF file, and instruct it to print again.
Printing of the TIFF data was interrupted. Instruct it to print again.
The form specified in the emulation setting is not registered in the host
computer. Resend the form data.
• Could not acquire the IP address from the text string after the @ character in
an e-mail address. Enter the mail address correctly.
• The DNS internet address after the @ character could not be resolved. Enter
the DNS server address correctly.
Printing a simple recipient result report failed. Set the [E-mail Receive Protocol]
on the sender's end to [SMTP].
An attempt was made to print a job template while it was being updated. Wait a
while, and then instruct it to print again.
Data is not stored in a forwarding address directory.
• Check that there is space on the target disk.
• Check the directory access permissions.
• Delete any [.LCK] lock files in the target directory.
Data is not stored in a forwarding address directory. Delete any [.LCK] lock files
in the target directory.
Unable to move onto the downloading mode.
Detected mismatching downloaded data product ID due to corrupt downloaded
data. Try downloading again.
An error occurred to the data being downloaded. Check if the connection
between the external device and the machine is secured, and try executing the
operation again.
An XPJL error occurred while downloading. Try executing the job again. Contact
the Xerox Welcome Center if the problem persists.
Received a PDF file that contains unsupported functions. Use a print driver to
print the file.
An error occurred while processing the annotation image data due to insufficient
memory. Take one of the following actions:
• Increase the annotation image size.
• Reduce the number of the images in [Repeat Image].
Contact the Xerox Welcome Center if the problem persists.
Unable to print due to insufficient hard disk space. Reduce the number of pages
in print data, for instance by dividing the print data, or by printing one copy at a
time when making multiple copies.
Description and Remedy
Xerox WorkCentre 7132 User Guide