Xerox WorkCentre 7132 User Manual page 94

4 Fax/Internet Fax
Character
< >
space
DTMF Method - Examples
The DTMF method uses combinations of special characters to send documents. See
the following examples.
• Remote Mailbox - Sends a document to a mailbox on a remote machine.
Telephone number of
remote machine
• Polling - Retrieves a document stored in a mailbox on a remote machine.
94
Function
/ Mask data (to
protect
confidential
information)
\ Screen mask
: Pulse-to-tone
switch
' Speed dial or
group code
Communication
line switch
= Dial tone
detection
S Password check
(for remote
machine
identification)
Readability
improvement
! Start DTMF code
signaling
$ Wait for DTMF
confirmation
!*$
Select [/] before and after entering confidential information
to display as asterisks. This character must be preceded
with "!" to be effective.
Masks the mailbox password on the screen with asterisks
\
(*). Select [ ] before and after entering a mailbox password.
Switches pulse dialing to tone dialing, for example when
using an automated message recording system that
requires tone signals.
Indicates a 3-digit speed dial or group code. Place this
character before and after the code.
Switches communication lines that include parameter data,
where the parameter data include characters "0" to "9" or
",". The parameter data must be placed between angle
brackets ("<" and ">"). If G3-3CH is installed, entering
either <1>, <2>, or <4> prior to specifying the fax
destination switches the communication lines.
Suspends dialing until a dial tone is detected.
Use this character to verify that the correct number has
been entered. The machine checks if the password you
entered after "S" matches the fax number of the remote
machine. If the match is confirmed the machine sends the
document.
Improves readability by inserting spaces in a telephone
number, for example "1 234 5678" instead of "12345678".
Pauses regular fax dialing, and starts the DTMF (dual tone
multi-frequency) method for sending documents to
mailboxes on the remote machines.
Wait for a DTMF confirmation signal from the remote
machine and proceed to the next step.
Mailbox number of
remote machine
Description
##\ Mailbox password
Xerox WorkCentre 7132 User Guide
\##$