Stored Programming Tone; Stored Programming Complete Tone; Screen/Button Settings - Xerox C75 System Administration Manual

Common Service Settings
Machine Ready Tone
Job Complete Tone 1, 2
Fault Tone
Auto Clear Alert Tone
Alert Tone
Out of Paper Warning Tone
Low Toner Alert Tone
Stored Programming

Stored Programming Complete Tone

7. Select Change Settings.
8. Select the desired setting for the option.
9. Select Save.
The previous screen is displayed.
10. If desired, select another option to set or change and repeat the previous steps.
11. Select Close.
The main Tools tab screen is displayed.
12. Exit administrator mode.

Stored Programming Tone

Select the volume level that sounds while the machine records a job into the job memory.
Note
It is not possible to disable this sound.
Stored Programming Complete Tone
Select the volume that sounds when the Stored Programming is completed. Select
Loud, Normal, or Soft. To disable the sound, select Off.

Screen/Button Settings

Use the Screen/Button Settings feature to set specific screens and buttons that display
when the power is turned on, when exiting Power Saver, and more. Options include:
Screen Default
Assign a default screen that displays when the machine powers on; selections include
Services, Copy, Job Status, or Machine Status.
Service Screen Default
Assign a default to the service screen; selections include Services Home, Copy, or Stored
Programming.
9-8 Xerox Color C75 Press
®
System Administration Guide