Sided Copying - Xerox WorkCentre 7132 User Manual

[Tray 5 (Bypass)] Screen
You can temporarily use the bypass tray to load paper that is unavailable from the
preprogrammed trays. Up to a 10 mm or 0.4 inch stack of paper (approximately 95
sheets of 80 g/m
1.
Select [Bypass Tray] on the
[Paper Supply] screen.
2.
Select the required option.
3.
Select [Save].
Paper Size
Displays the [Tray 5 (Bypass) - Paper Size] screen.
• Custom Size - Allows you to specify the width and length of paper size using the
scroll buttons in 1 mm (0.1 inch) increments. The acceptable ranges of paper sizes
are 89-297 mm (3.5-11.7 inches) for width and 99-432 mm (3.9-17.0 inches) for
length.
• Standard Sizes - Displays the preset paper sizes on the touch screen, and allows
you to select the paper size. The presets are set up by the Key Operator.
Paper Type
Displays the [Tray 5 (Bypass) - Paper Type] screen. Displays the preset paper types
on the touch screen, and allows you to select the paper type. The presets are set up
by the Key Operator. The setting is temporary only and applies to the current copy job.

2 Sided Copying

This feature allows you to automatically make single or double-sided copies from single
or double-sided documents.
NOTE: Before using the feature, specify the document orientation to indicate top of
the document in [Original Orientation] on the [Layout Adjustment] screen.
NOTE: The double-sided copy option cannot be used with the following paper types:
Transparency, Lightweight, Heavyweight, Labels, cover stock, as well as paper
already printed on one side (i.e., scrap paper).
1.
Select a preset button or [More]
for the [2 Sided Copying]
feature on the [Copy] screen.
More
Displays the [2 Sided Copying] screen.
Xerox WorkCentre 7132 User Guide
2
paper) can be loaded into the bypass tray.
Copy
53