Troubleshooting The Gigabit Ethernet Line Card - Cisco uBR10012 Troubleshooting Manual

Troubleshooting the Gigabit Ethernet Line Card

Troubleshooting the Gigabit Ethernet Line Card

Figure 4-5
verify correct operation.
Tip Make sure that the gigabit Ethernet Interface Converter (GBIC) type on the Cisco uBR10012 router
matches the GBIC type at the other end of the fiber optic cable.
Figure 4-5
CISCO
10000
Cisco uBR10012 Universal Broadband Router Troubleshooting Guide
4-18
describes the LEDs on the Cisco uBR10-1GE Gigabit Ethernet line card faceplate to help you
Gigabit Ethernet Line Card Faceplate and LED Descriptions
LED Status
Fail Yellow Yellow
Off
Rx (receive) Green
Off
Tx (transmit) Green
Off
Link Green
Off
Chapter 4
Description
A major failure has disabled the
line card.
The line card is operating
properly.
Receiving traffic.
Not receiving traffic.
Transmitting traffic.
Not transmitting traffic.
Carrier detected; the port is
able to pass traffic.
No carrier detected; the port is
not able to pass traffic.
Troubleshooting Line Cards
OL-1237-01