Dynamic Tunnels Tab Field Descriptions - Symantec 360R - Security Gateway SGS Administration Manual

Dynamic Tunnels tab field descriptions

This table describes the fields on the Dynamic Tunnels tab you use to configure
dynamic Gateway-to-Gateway VPN tunnels.
Table C-25 Dynamic Tunnels field descriptions
Section Field
IPsec Security VPN Tunnel
Association
Name
Enable VPN
Tunnel
Phase 1 Type
VPN Policy
Description
Select a tunnel to update or delete.
Name of the tunnel.
The tunnel name can be up to 25 alphanumeric
characters, dashes, and underscores. This name
used only for reference within the SGMI.
You can create up to 50 tunnels.
Enables VPN users to use the tunnel you are
defining.
To temporarily disable the tunnel, uncheck this
box and click Update. To permanently disable
the tunnel, click Delete.
Mode of phase 1 negotiation.
Options include:
Main Mode
■
Negotiates with a source IP address.
Aggressive Mode
■
Negotiates with an identifier such as a
name. Client VPN software typically
negotiates in aggressive mode.
The default value is Main Mode.
Policy that dictates authentication, encryption,
and timeout settings.
The list contains Symantec pre-defined policies
and any policies you created on the VPN Policies
tab.
Field descriptions 189
VPN field descriptions