Symantec 360R - Security Gateway SGS Administration Manual page 46

46 Configuring a connection to the outside network
Configuring dynamic DNS
When you create an account with TZO, they send you the following information
to log in and use your account: key (password), email (user name), and domain.
Gather this information before configuring the appliance to use TZO. For more
information about TZO dynamic DNS, go to http://www.tzo.com.
To use standard service DNS, gather the following information:
Account information
■
User name (which may be different from the account name) and password
for the dynamic DNS account.
Server
■
IP address or resolvable name of the dynamic DNS server. For example,
members.dyndns.org.
To configure dynamic DNS
For model 320, you can configure the WAN port to use dynamic DNS. For model
360 or 360R, you can configure WAN1, WAN2, or both ports to use dynamic
DNS.
See "Dynamic DNS tab field descriptions"
See "Main Setup tab field descriptions"
To configure TZO dynamic DNS
1 In the SGMI, in the left pane, click WAN/ISP.
2 On the Dynamic DNS tab, under Service Type, click TZO.
3 Do one of the following:
For model 320, skip to step 4.
■
For model 360 and 360R, in the WAN Port drop-down list, select the
■
WAN port for which you are configuring TZO.
4 Under TZO Dynamic DNS Service, do the following:
In the Key text box, type the key that TZO sent when the account was
■
created.
In the Email text box, type the email address you specified when you
■
created the TZO account.
In the Domain text box, type the domain name that TZO handles. For
■
example, marketing.mysite.com.
5 Click Save.
To configure standard service DNS
1 In the SGMI, in the left pane, click WAN/ISP.
on page 171.
on page 164.