Start IP Address
Finish IP Address
Restore to Defaults
11 If you are changing local IP address, local network mask, DHCP server, start
IP address, or finish IP address, do the following:
Type the new value for the setting you are changing.
■
Press Enter.
■
12 If you are restoring the default values for the appliance, press Enter.
13 Type 7.
The appliance restarts.
14 On the rear of the appliance, turn DIP switch 3 to the off position (down).
15 On the rear of the appliance, quickly press the reset button.
Managing the security gateway using the serial console
Type 4 to type the first IP address in the range that the DHCP
server can allocate.
Type 5 to type the last IP address in the range that the DHCP
server can allocate.
Type 6 to restore the appliance's default settings for Local IP
address, local network mask, DHCP server, and DHCP range.
Administering the security gateway
21