Dial-Up Backup & Analog/Isdn Tab Field Descriptions - Symantec 360R - Security Gateway SGS Administration Manual

Dial-up Backup & Analog/ISDN tab field descriptions
Table C-12 PPPoE tab field descriptions (Continued)
Section Field
Choose Service Query Services
Service
User Information User Name
Password
Verify Password
Manual Control Connect
Disconnect
The Dial-Up Backup & Analog/ISDN lets you configure the security gateway to
connect to the Internet with a primary dial-up account, a primary dial-up ISDN
account, or a back-up dial-up account.
Table C-13 Dial-up or ISDN tab field descriptions
Section Field
Backup Mode Enable Backup
Mode
WAN/ISP field descriptions
Description
When you click Query Services, the security
gateway connects to your ISP and determines
which services are available.
You must disconnect from your PPPoE account
before using this feature.
Select a service for the PPPoE account. To
determine which services are available, click
Query Services.
User name for the PPPoE account. This may be
different from the account name.
Some ISPs expect email address format for the
user name, for example, johndoe@myisp.net.
Password for the PPPoE account.
Retype the password for the PPPoE account.
Create a connection to the PPPoE account.
Closes an open connection to the PPPoE account.
Description
If you use a dedicated account as your primary
connection, you can specify a dial-up account as
a backup, if the connection to the account fails.
Field descriptions 167