Enabling Content Filtering For Lan; Enabling Content Filtering For Wan - Symantec 360R - Security Gateway SGS Administration Manual

Enabling content filtering for LAN

Enabling content filtering for WAN

3 In the Input URL text box, type the name of a site you want to add to the list.
For example, yoursite.com or mysite.com/pictures/me.html.
4 Click Add.
Repeat the previous two steps until you have all your URLs added to the list.
5 Click Save List.
To remove a URL from an allow or deny list
1 In the left pane, click Content Filtering.
2 From the Delete URL drop-down list, select the URL that you want to delete.
3 Click Delete Entry.
4 Click Save List.
After you have set up the allow or deny lists, you must enable content filtering
for each computer group for which you want to filter traffic. See
inbound access" on page 68.
To enable content filtering for a computer group
See "Computer Groups tab field descriptions"
1 In the left pane, click Firewall.
2 On the Computer Groups tab, under Security Policy, on the Computer Group
drop-down list, select the computer group for which you want to enable
content filtering.
3 Under Content Filtering, check Enable Content Filtering.
4 Do one of the following:
To filter content based on the deny list, click Use Deny List.
■
To filter content based on the allow list, click Use Allow List.
■
5 Click Save.
You enable content filtering for the WAN through VPN client tunnels.
See "Defining client VPN tunnels"
Advanced network traffic control
Managing content filtering lists
on page 179.
on page 99.
113
"Defining