Status Tab Field Descriptions - Symantec 360R - Security Gateway SGS Administration Manual

152 Field descriptions
Logging/Monitoring field descriptions

Status tab field descriptions

The Status tab shows the current conditions and settings of the security
gateway.
Table C-1 Status tab field descriptions
Section Field
Model 320: Connection Status Displays whether the WAN port is connected or
WAN (External
Port)
Netmask
Model 360/360R:
WAN 1
IP Address
(External Port)
WAN 2
Physical Address
(External Port)
Default Gateway
DHCP Client
DNS IP
Address(es)
DHCP Lease Time
Description
disconnected to the Internet or an internal
network.
Derived from DHCP or static IP configuration.
Displays the IP address of the WAN port based
on your local configuration.
Media Access Control (MAC) address of the
security gateway.
Displays an IP address based on your local
configuration. Used by the security gateway to
route any packets destined to any networks it
does not recognize. In most configurations, this
is the IP address of your ISP's router.
Displays enabled or disabled. If enabled, the
security gateway uses DHCP to request an IP
address, DNS server, and routing information
from your ISP or intranet when you start the
security gateway.
Displays an IP address provided by your ISP.
If DHCP Client is enabled, this displays the
amount of time the security gateway will own
the IP address. This is obtained when you start
the security gateway.