Upgrading Firmware Manually - Symantec 360R - Security Gateway SGS Administration Manual

Upgrading firmware manually

Table 9-1 shows and lists the LiveUpdate server configurations shown in
9-1.
Table 9-1 LiveUpdate server configurations
Location Description
1 Symantec LiveUpdate server: http://liveupdate.symantec.com. This
is the standard Symantec corporate LiveUpdate site which
broadcasts firmware availability. It is the default configuration in
your appliance.
2 Internal Live Update server at a remote internal location, protected
by a VPN tunnel.
3 Internal LiveUpdate server at a local location.
LiveUpdate servers can be on the WAN or LAN, or accessible through a Gateway-
to-Gateway VPN tunnel.
See "LiveUpdate tab field descriptions"
To change the LiveUpdate server location
1 In the left pane, click Administration.
2 In the right pane, on the LiveUpdate tab, under General Settings, in the
LiveUpdate Server text box, type the IP address or fully qualified domain
name for your LiveUpdate server.
3 Click Save.
Firmware upgrades are available from Symantec's Web site. If you do not
configure LiveUpdate to automatically download and apply firmware upgrades,
or if you are instructed to manually perform an upgrade by Symantec Technical
Support, you should check the Symantec Web for the latest version of the
firmware. Your current firmware version number is available from the Status
screen.
The firmware file that is available from Symantec Technical Support is called
all.bin. It overwrites your configuration, so before you begin a manual firmware
Logging, monitoring and updates
on page 159.
129
Updating firmware
Figure