Advanced Tab Field Descriptions - Symantec 360R - Security Gateway SGS Administration Manual

Advanced tab field descriptions

Use the Advanced tab to configure advanced VPN settings for phase 1
negotiation, which applies to all clients.
Table C-31 Advanced tab field descriptions
Section Field
Global VPN Client Local Gateway
Settings Phase 1 ID Type
Local Gateway
Phase 1 ID
VPN Policy
Dynamic VPN Enable Dynamic
Client Settings VPN Client
Tunnels
Pre-shared Key
Description
Phase 1 ID (ISAKMP) used by local gateway for
VPN clients.
Options include:
IP Address
■
If you select IP Address, leave the Local
Gateway Phase 1 ID text box blank.
Distinguished Name
■
If you select Distinguished Name, in Local
Gateway Phase 1 ID text box, type a local
gateway Phase 1 ID to be used by all clients.
Value that corresponds to the ID Type.
If you selected IP address, leave this text box
blank. If you selected Distinguished Name, type
a fully qualified domain name. Any client
connected to the security gateway must use this
Phase 1 ID when defining his or her remote
gateway endpoint on the client.
The maximum value is 31 alphanumeric
characters.
VPN policy for VPN client tunnels for phase 2
tunnel negotiation.
The list shows pre-defined Symantec policies
and any policies you created on the VPN Policies
tab.
Lets undefined VPN clients connect to the
security gateway for extended authentication.
Key for authenticating ISAKMP (IKE). It
authenticates the remote end of the tunnel.
The pre-shared key is between 20 and 64
alphanumeric characters. The pre-shared key on
the remote end of this tunnel must match this
value.
Field descriptions 203
VPN field descriptions