Liveupdate And Firmware Upgrade Led Sequences - Symantec 360R - Security Gateway SGS Administration Manual

LiveUpdate and firmware upgrade LED sequences

Table 9-3 LEDs states and appliance status
Error LED (2) state
Solid on
Flashing once
Flashing twice
Flash three
Solid on
Solid on
Solid on
Solid off
Both flashing alternatively
When you apply a firmware upgrade using the symcftpw utility or TFTP, or if
LiveUpdate is downloading and applying a firmware upgrade, there is a unique
sequence of LED flashing that indicates the
sequences.
Table 9-4 LiveUpdate LED sequences
Description
Firmware retrieval from the
Internet using LiveUpdate or
uploading it using the
symcftpw or TFTP tools.
Firmware downloaded and
verified. This takes
approximately 10 seconds.
Applying the firmware. The
amount of time this takes
depends on the model.
Update complete.
Appliance resets. All LEDs
illuminate, and then go to the
normal operation pattern.
Transmit LED (3) state Appliance status
Solid on
Solid off
Solid off
Solid off
Flashing once
Flashing twice
Flashing three
Solid off
progress.Table 9-4
Power
On
On
On
On
On
Logging, monitoring and updates
Interpreting LEDs
Hardware problem.
RAM error.
Timer error.
DMA error.
LAN error.
WAN error.
Serial error.
No power.
Download in progress.
■
Appliance is writing to flash.
■
describes the
Error Transmit
On Flashing when
there is traffic.
Off Off
Flashing Flashing
alternately with alternately with
Transmit Error
On On
Off Flashing when
there is traffic.
139