Symantec 360R - Security Gateway SGS Administration Manual page 42

42 Configuring a connection to the outside network
Configuring connectivity
To enable the backup dial-up account
1 In the SGMI, in the left pane, click WAN/ISP.
2 On the Dial-up Backup and Analog/ISDN tab, under Backup Mode, do the
following:
Check Enable Backup Mode.
■
In the Alive Indicator Site IP or URL text box, type the IP address or
■
resolvable name of the site to check connectivity.
3 Under Modem Settings, click Save.
4 Follow the steps in
Controlling your dial-up account manually
You can force the appliance to connect or disconnect from your dial-up account.
This is helpful for verifying connectivity.
To manually control the dial-up account
See "Dial-up Backup & Analog/ISDN tab field descriptions"
1 In the SGMI, in the left pane, click WAN/ISP.
2 To connect to the dial-up account, on the Dial-up Backup & Analog/ISDN
tab, under Manual Control, click Dial.
3 To disconnect from the dial-up account, on the Dial-up Backup & Analog/
ISDN tab, under Manual Control, click Hang Up.
Verifying dial-up connectivity
Once you have configured the appliance to use your dial-up account, verify that
it connects correctly.
To verify dial-up connectivity
See "Dial-up Backup & Analog/ISDN tab field descriptions"
See "Status tab field descriptions"
1 In the SGMI, in the left pane, click WAN/ISP.
2 In the right pane, on the Dial-up Backup & Analog/ISDN tab, under Manual
Control, click Dial.
3 In the left pane, click Logging/Monitoring.
4 In the right pane, on the Status tab, under WAN1 (External Port), next to
Connection Status, your connection status is displayed.
"Dial-up accounts" on page 39.
on page 152.
on page 167.
on page 167.