Dynamic Tunnels Tab Field Descriptions - Symantec 460R - Gateway Security Administrator's Manual

Dynamic Tunnels tab field descriptions

The Dynamic Tunnels tab lets you configure dynamic Gateway-to-Gateway VPN tunnels.
Table C-27
Section
IPSec Security
Association
Dynamic Tunnels field descriptions
Field
VPN Tunnel
Name
Enable VPN Tunnel
Phase 1 Type
VPN Policy
Description
Select a tunnel to update or delete.
Name of the tunnel.
The tunnel name can be up to 25 alphanumeric characters, dashes,
and underscores. This name used only for reference within the
SGMI.
You can create up to 50 tunnels.
Enables the tunnel you are defining so it can be used by remote VPN
users.
To temporarily disable the tunnel, uncheck this check box and click
Update. To permanently disable the tunnel, click Delete.
Select a mode for phase 1 negotiation.
Options include:
Main Mode
Negotiates with a source IP address.
Aggressive Mode
Negotiates with an identifier such as a name. Client VPN
software typically negotiates in aggressive mode.
The default value is Main Mode.
Select a policy that dictates authentication, encryption, and timeout
settings.
The list contains Symantec pre-defined policies and any policies you
created on the VPN Policies tab.
Field descriptions 145
VPN field descriptions