Table C-13
Dial-up or ISDN tab field descriptions (Continued)
Section
Field
Modem Settings
Model
Initialization
String
Line Speed
Line Type
Dial Type
Dial String
Idle Time-out
Redial String
Manual Control
Dial
Hang Up
WAN/ISP field descriptions
Description
Model type of your modem. If your specific
model type is not listed, click Other.
Modem command that the security gateway
sends to the modem to begin dialing the ISP.
Specify this value only if you select Other as the
modem model.
Speed at which you want the modem to connect
to the dial-up account.
If the security gateway is having trouble
connecting, lower the line speed.
Type of line for your account.
Dial Up Line
■
This line type is typically used if a
connection to the Internet is not connected
all the time.
Leased line
■
This line type provides a permanent
connection to the Internet.
Type of signal your modem uses to dial the dial-
up telephone number.
Options include:
pulse
■
tone
■
other
■
Modem command to begin dialing the dial-up
telephone number.
Number of minutes that the connection may
remain idle (unused) before disconnecting.
Modem command that specifies to redial the
dial-up telephone number if the initial
connection fails.
Opens a connection to the dial-up account.
Closes an open connection to the dial-up
account.
Field descriptions
169