Basic Management Tab Field Descriptions; Snmp Tab Field Descriptions - Symantec 360R - Security Gateway SGS Administration Manual

158 Field descriptions
Administration field descriptions

Basic Management tab field descriptions

SNMP tab field descriptions

The Basic Management tab helps you control access to the SGMI with the
administration password and allowed IP addresses.
Table C-5 Basic Management tab field descriptions
Section Field
Administration admin's Password
Password
Verify Password
Remote Start IP Address
Management
End IP Address
Allow Remote
Firmware Upgrade
The SNMP tab lets you configure your security gateway for monitoring with
SNMP servers.
Table C-6 SNMP tab field descriptions
Section Field
SNMP Read-only Community String
Managers (GETS and
TRAPS)
IP Address 1, IP
Address 2, IP
Address 3
Enable Remote
Monitoring
Description
Password used to access the SGMI.
The user name is always admin. The login
is case-sensitive.
Retype the admin's password.
First IP address in the range of addresses
that you permit to access the SGMI.
To delete an IP address, enter 0 in each of
the text boxes.
Last IP address in the range of addresses
that you permit to access the SGMI.
To delete an IP address, enter 0 in each of
the text boxes.
Allows a firmware upgrade from the range
of IP addresses.
Description
A community string may be required by
your SNMP server.
IP address of SNMP TRAP receivers. TRAPs
are forwarded to these addresses.
Allows external access to SNMP GET on the
appliance.