Configuring An Exposed Host - Symantec 360R - Security Gateway SGS Administration Manual

78 Network traffic control
Configuring advanced options

Configuring an exposed host

Other
■
Redcreek Ravlin
None
■
Note: Only change the IPsec pass-thru setting if required to do so by Symantec
Technical Support.
To configure IPsec pass-thru settings
See "Advanced tab field descriptions"
1 In the SGMI, in the left pane, click Firewall.
2 On the Advanced tab, under IPsec Passthru Settings,
3 Click Save.
Exposed Host opens all ports so that one computer on a LAN has unrestricted
two-way communication with Internet servers or users. This is useful for
hosting games or special server applications.
All traffic that is not specifically allowed by inbound rules is directed to the
exposed host.
Warning: Because of the security risk, only activate Exposed Host only when
required to do so.
To configure an exposed host
See "Advanced tab field descriptions"
1 In the left pane, click Firewall.
2 In the right pane, on the Advanced tab, under Exposed Host, check Enable
Exposed Host.
3 In the LAN IP Address text boxes, type the IP address of the host you want to
expose.
4 Click Save.
on page 186.
on page 186.