Symantec 360R - Security Gateway SGS Administration Manual page 41

To configure your primary dial-up account
1
In the SGMI, in the left pane, click WAN/ISP.
2 In the right pane, on the Main Setup tab, under Connection Type, click
Analog/ISDN.
3 Click Save.
4
On the Dial-up Backup & Analog/ISDN tab, under ISP Account Information,
do the following:
User Name
Password
Verify Password
Dial-up Telephone 1
Dial-up Telephone 2
Dial-up Telephone 3
5 Under Modem Settings, do the following:
Model
Line Speed
Dial Type
Redial String
Initialization String
Line Type
Dial String
Idle Time Out
6 Click Save.
After you click Save, the appliance restarts. Network connectivity is interrupted.
Configuring a connection to the outside network
Type the account user name.
Type the account password.
Retype the account password.
Type the dial-up telephone number.
Optionally, type a backup dial-up telephone number.
Optionally, type a backup dial-up telephone number.
Select the model of your modem.
Select the speed at which you want to connect.
Select the dial type.
Type a redial string.
Type an initialization string.
If you select a modem type other than Other, the initialization
string is provided. If you select Other, you must type an
initializatio nstring.
Select the type of telephone line.
Type a dial string.
Type the amount of time, in minutes, after which the
connection is closed if idle.
Configuring connectivity
41