44 Configuring a connection to the outside network
Configuring advanced connection settings
Advanced PPP settings
To configure advanced DHCP settings
You can configure the idle renew time and manually force a DHCP renew
request.
See
"Advanced tab field descriptions"
To configure idle renew
1
In the SGMI, in the left pane, click WAN/ISP.
2
On the Advanced tab, under Optional Connection settings, in the Idle Renew
DHCP text box, type the number of minutes after which a renew lease
request is sent.
3
Click Save.
To force a DHCP renew
1
In the SGMI, in the left pane, click WAN/ISP.
2
For model 320, on the Advanced tab, under Optional Connection settings,
click Force Renew.
3
For model 360 or 360R, do one of the following:
To renew WAN1, on the Advanced tab, under Optional Connection
■
Settings, click Renew WAN1.
To renew WAN2, on the Advanced tab, under Optional Connection
■
Settings, click Renew WAN2.
You can configure the echo requests that the appliance sends to verify that the
appliance is connected to the PPPoE account.
To configure PPP settings
See
"Advanced tab field descriptions"
1
In the SGMI, in the left pane, click WAN/ISP.
2
On the Advanced tab, under PPP settings, do the following:
In the Time-out text box, type the number of seconds before trying
■
another echo request.
In the Retries text box, type the number of times for the appliance to
■
attempt to reconnect.
3
Click Save.
on page 175.
on page 175.