Supervisor Engine 32 Ports - Cisco 7604 Configuration Manual

Flash Memory on a Supervisor Engine 32
Flash Memory on a Supervisor Engine 32
The Supervisor Engine 32 supports the following flash memory:
•
•

Supervisor Engine 32 Ports

The console port for the Supervisor Engine 32 port is an EIA/TIA-232 (RS-232) port. The
Supervisor Engine 32 also has two Universal Serial Bus (USB) 2.0 ports that are not currently enabled.
WS-SUP32-GE-3B ports 1 through 8 have small form-factor pluggable (SFP) connectors and port 9 is a
10/100/1000 Mbps RJ-45 port.
WS-SUP32-10GE ports 1 and 2 are 10 Gigabit Ethernet ports that accept XENPAKs and port 3 is a
10/100/1000 Mbps RJ-45 port.
For additional information (including configuration examples and troubleshooting information), see the
Tip
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
5-2
disk0:—One external CompactFlash Type II slot (supports CompactFlash Type II Flash PC cards)
sup-bootdisk:—256 MB internal CompactFlash memory (from ROMMON, it is bootdisk:)
Chapter 5 Configuring a Supervisor Engine 32
OL-4266-08