Configuring A Match Clause In A Vlan Access Map Sequence - Cisco 7604 Configuration Manual

Ios software configuration guide
Hide thumbs Also See for 7604:
Table of Contents

Advertisement

Configuring VACLs
Command
Router(config)# no vlan access-map map_name 0-65535
Router(config)# no vlan access-map map_name
When defining a VLAN access map, note the following information:
See the

Configuring a Match Clause in a VLAN Access Map Sequence

To configure a match clause in a VLAN access map sequence, perform this task:
Command
Router(config-access-map)# match {ip address {1-199 |
1300-2699 | acl_name } | ipx address {800-999 |
acl_name }| mac address acl_name }
Router(config-access-map)# no match {ip address
{1-199 | 1300-2699 | acl_name } | ipx address {800-999
| acl_name }| mac address acl_name }
When configuring a match clause in a VLAN access map sequence, note the following information:
See the
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
35-6
To insert or modify an entry, specify the map sequence number.
If you do not specify the map sequence number, a number is automatically assigned.
You can specify only one match clause and one action clause per map sequence.
Use the no keyword with a sequence number to remove a map sequence.
Use the no keyword without a sequence number to remove the map.
"VLAN Access Map Configuration and Verification Examples" section on page
You can select one or more ACLs.
VACLs attached to WAN interfaces support only standard and extended Cisco IOS IP ACLs.
Use the no keyword to remove a match clause or specified ACLs in the clause.
For information about named MAC-Layer ACLs, refer to the
page
41-67.
For information about Cisco IOS ACLs, refer to the Cisco IOS Security Configuration Guide,
Release 12.2, "Traffic Filtering and Firewalls," at this URL:
http://www.cisco.com/en/US/docs/ios/12_2/security/configuration/guide/fsecur_c.html
"VLAN Access Map Configuration and Verification Examples" section on page
Purpose
Deletes a map sequence from the VLAN access map.
Deletes the VLAN access map.
Purpose
Configures the match clause in a VLAN access map sequence.
Deletes the match clause in a VLAN access map sequence.
"Configuring MAC ACLs" section on
Chapter 35
Configuring VLAN ACLs
35-9.
35-9.
OL-4266-08

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

761376067609-s7600 series

Table of Contents