Configuring Network Admission Control; Understanding Nac - Cisco 7604 Configuration Manual

Configuring Network Admission Control

This chapter describes how to configure Network Admission Control (NAC) on Cisco 7600 series
routers. With a PFC3, Release 12.2(18)SXF2 and later releases support NAC.
For complete syntax and usage information for the commands used in this chapter, refer to these
Note
publications:
•
•
•
This chapter contains these sections:
•
•
For additional information (including configuration examples and troubleshooting information), see the
Tip
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html

Understanding NAC

These sections describe NAC:
•
•
•
OL-4266-08
Cisco IOS Master Command List, Release 12.2SX, at this URL:
http://www.cisco.com/en/US/docs/ios/mcl/122sxmcl/12_2sx_mcl_book.html
The Network Admission Control feature module at this URL:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t8/feature/guide/gt_nac.html
The Cisco IOS Security Command Reference, Release 12.3 at this URL:
http://www.cisco.com/en/US/docs/ios/12_3/security/command/reference/secur_r.html
Understanding NAC, page 45-1
Configuring NAC, page 45-12
NAC Overview, page 45-2
NAC Device Roles, page 45-3
NAC Layer 2 IP Validation, page 45-4
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
C H A P T E R
45
45-1