Displaying The Netflow Hardware Forwarding Count; Displaying The Fib Hardware Bridging And Drop Counts - Cisco 7604 Configuration Manual

Chapter 27 Configuring IPv6 Multicast PFC3 and DFC3 Layer 3 Switching
IPv6 Multicast FIB SC summary on Slot[6]:
Shortcut Type
---------------------------+--------------
(*, G/128)
(*, G/m)

Displaying the NetFlow Hardware Forwarding Count

This example shows how to display the NetFlow hardware forwarding count:
Router# show platform software ipv6-multicast summary
IPv6 Multicast Netflow SC summary on Slot[1]:
Shortcut Type
---------------------------+--------------
(S, G)
(*, G)
<...Output deleted...>
IPv6 Multicast Netflow SC summary on Slot[6]:
Shortcut Type
---------------------------+--------------
(S, G)
(*, G)
<...Output truncated...>
The NetFlow (*, G) count is always zero because PIM-SM (*,G) forwarding is supported in software on
Note
the MSFC3.

Displaying the FIB Hardware Bridging and Drop Counts

This example shows how to display the FIB hardware bridging and drop hardware counts:
Router# show platform software ipv6-multicast summary | begin FIB
IPv6 Multicast FIB SC summary on Slot[1]:
Shortcut Type
---------------------------+--------------
(*, G/128)
(*, G/m)
<...Output deleted...>
IPv6 Multicast FIB SC summary on Slot[6]:
Shortcut Type
---------------------------+--------------
(*, G/128)
(*, G/m)
Note •
•
OL-4266-08
The (*, G/128) value is a hardware bridge entry count.
The (*, G/m) value is a hardware bridge/drop entry count.
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
Using show Commands to Verify IPv6 Multicast Layer 3 Switching
Shortcut count
10
47
Shortcut count
100
0
Shortcut count
100
0
Shortcut count
10
47
Shortcut count
10
47
27-7