Monitoring Flex Links - Cisco 7604 Configuration Manual

Monitoring Flex Links

Monitoring Flex Links
Table 11-1
Table 11-1 Flex Links Monitoring Command
Command
1
show interface [{ type
number }] switchport backup
1. type = ethernet, fastethernet, gigabitethernet, or tengigabitethernet
Tip For additional information (including configuration examples and troubleshooting information), see the
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
11-4
shows the privileged EXEC command for monitoring the Flex Links configuration.
slot/port } | {port-channel
Purpose
Displays the Flex Links backup interface configured for an
interface, or displays all Flex Links configured on the router
and the state of each active and backup interface (up or
standby mode).
Chapter 11 Configuring Flex Links
OL-4266-08