Product Overview; Supported Hardware And Software; User Interfaces - Cisco 7604 Configuration Manual

Ios software configuration guide
Hide thumbs Also See for 7604:
Table of Contents

Advertisement

Product Overview

This chapter consists of these sections:
Tip
For additional information (including configuration examples and troubleshooting information), see the
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html

Supported Hardware and Software

For complete information about the chassis, modules, and software features supported by the Cisco 7600
series routers, refer to the
Supervisor Engine 32, and Supervisor Engine

User Interfaces

Release 12.2SX supports configuration using the following interfaces:
OL-4266-08
Supported Hardware and Software, page 1-1
User Interfaces, page 1-1
Configuring Embedded CiscoView Support, page 1-2
Software Features Supported in Hardware by the PFC and DFC, page 1-3
Release Notes for Cisco IOS Release 12.2SX on the Supervisor Engine 720,
CLI—See
Chapter 2, "Command-Line Interfaces."
SNMP—Refer to the Release 12.2 IOS Configuration Fundamentals Configuration Guide and
Command Reference at this URL:
http://www.cisco.com/en/US/docs/ios/12_2/configfun/configuration/guide/ffun_c.html
Cisco IOS web browser interface—Refer to "Using the Cisco Web Browser" in the IOS
Configuration Fundamentals Configuration Guide at this URL:
http://www.cisco.com/en/US/docs/ios/12_2/configfun/configuration/guide/fcf005.html
Embedded CiscoView—See the
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
C H A P T E R
2.
"Configuring Embedded CiscoView Support" section on page
1
1-2.
1-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

761376067609-s7600 series

Table of Contents