Layer 3 Switching - Cisco 7604 Configuration Manual

Ios software configuration guide

Hide thumbs Also See for 7604:

Table of Contents

Configuring IPv6 Multicast PFC3 and DFC3

Layer 3 Switching

With Release 12.2(18)SXE and later releases, the PFC3 and DFC3 provide hardware support for IPv6

multicast traffic. Use these publications to configure IPv6 multicast on Cisco 7600 series routers:

The Cisco IOS IPv6 Configuration Library, "Implementing IPv6 Multicast":

http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/12_2sx/ipv6_12_2sx_book.html

The Cisco IOS IPv6 Command Reference:

http://www.cisco.com/en/US/docs/ios/ipv6/command/reference/ipv6_book.html

These sections provide additional information about IPv6 multicast support on Cisco 7600 series

Features that Support IPv6 Multicast, page 27-2

IPv6 Multicast Guidelines and Restrictions, page 27-2

New or Changed IPv6 Multicast Commands, page 27-3

Configuring IPv6 Multicast Layer 3 Switching, page 27-3

Using show Commands to Verify IPv6 Multicast Layer 3 Switching, page 27-3

For additional information (including configuration examples and troubleshooting information), see the

documents listed on this page:

http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html

Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX

C H A P T E R

Show Quick Links

Table of Contents

7613 7606 7609-s 7600 series