Cisco 7604 Configuration Manual page 310

Configuring Prestandard IEEE 802.1s MST
Command
Step 5
Router# show spanning-tree mst number interface
interface name [detail]
Step 6
Router# show spanning-tree mst [ x ] [ interface Y ]
detail
Step 7
Router# show spanning-tree vlan vlan_ID
These examples show how to display spanning tree VLAN configurations in MST mode:
Router(config)# spanning-tree mst configuration
Router(config-mst)# instance 1 vlan 1-10
Router(config-mst)# name cisco
Router(config-mst)# revision 1
Router(config-mst)# ^Z
Router# show spanning-tree mst configuration
Name
Revision
Instance
--------
0
1
-------------------------------------------------------------------------------
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
20-36
[cisco]
1
Vlans mapped
---------------------------------------------------------------------
11-4094
1-10
Chapter 20 Configuring STP and Prestandard IEEE 802.1s MST
Purpose
Displays MST information for a given port and a given
instance.
Displays detailed MST information.
Displays VLAN information in MST mode.
OL-4266-08