Configuring Pfc3Bxl Or Pfc3B Mode Mpls Qos Egress Exp Mutation - Cisco 7604 Configuration Manual

Chapter 42 Configuring PFC3BXL or PFC3B Mode MPLS QoS
Displaying the Configuration of All Classes
To display the configuration of all classes configured for all service policies on the specified interface,
perform this task:
Command
Router# show policy interface interface_type
interface_number
This example shows the configurations for all classes on Fast Ethernet interface 3/27:
Router# show policy interface fastethernet 3/27
FastEthernet3/27
Service-policy input: ip2tag

Configuring PFC3BXL or PFC3B Mode MPLS QoS Egress EXP Mutation

You can configure a named egress EXP mutation map to mutate the internal DSCP-derived EXP value
before it is used as the egress EXP value. You can attach a named egress EXP mutation map to any
interface on which PFC QoS supports egress QoS.
These sections describe how to configure PFC3BXL or PFC3B mode MPLS QoS egress EXP mutation:
•
•
OL-4266-08
class-map: iptcp (match-all)
Match: access-group 101
police :
1000000 bps 1000000 limit 1000000 extended limit
Earl in slot 5 :
0 bytes
5 minute offered rate 0 bps
aggregate-forwarded 0 bytes action: set-mpls-exp-imposition-transmit
exceeded 0 bytes action: drop
aggregate-forward 0 bps exceed 0 bps
class-map: class-default (match-any)
Match: any
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Configuring Named EXP Mutation Maps, page 42-30
Attaching an Egress EXP Mutation Map to an Interface, page 42-30
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
Configuring PFC3BXL or PFC3B Mode MPLS QoS
Purpose
Displays the configuration of all classes configured for all
policy maps on the specified interface.
42-29