Cisco 7604 Configuration Manual page 941

Chapter 57 Using the Layer 2 Traceroute Utility
Using the Layer 2 Traceroute Utility
To display the Layer 2 path that a packet takes from a source device to a destination device, perform one
of these tasks in privileged EXEC mode:
Command
Router# traceroute mac
[interface type interface_number ] source_mac_address
[interface type interface_number ]
destination_mac_address [vlan vlan_id ] [detail]
Router# traceroute mac ip { source_ip_address |
source_hostname } { destination_ip_address |
destination_hostname } [detail]
OL-4266-08
Purpose
Uses MAC addresses to trace the path that packets take
through the network.
Uses IP addresses to trace the path that packets take through
the network.
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
Using the Layer 2 Traceroute Utility
57-3