Monitoring Private Vlans - Cisco 7604 Configuration Manual

Chapter 15 Configuring Private VLANs

Monitoring Private VLANs

Table 15-1
Table 15-1
Command
show interfaces status
show vlan private-vlan
[type]
show interface switchport
show interface
private-vlan mapping
This is an example of the output from the show vlan private-vlan command:
Switch(config)# show vlan private-vlan
Primary Secondary Type
------- --------- ----------------- ------------------------------------------
10
10
10
For additional information (including configuration examples and troubleshooting information), see the
Tip
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
OL-4266-08
shows the privileged EXEC commands for monitoring private VLAN activity.
Private VLAN Monitoring Commands
Purpose
Displays the status of interfaces, including the VLANs to which they
belong.
Displays the private VLAN information for the router.
Displays private VLAN configuration on interfaces.
Displays information about the private VLAN mapping for VLAN SVIs.
501 isolated
502 community
503 non-operational
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
Ports
Fa2/0/1, Gi3/0/1, Gi3/0/2
Fa2/0/11, Gi3/0/1, Gi3/0/4
Monitoring Private VLANs
15-17