Pfc3Bxl And Pfc3B Mode Mpls Label Switching - Cisco 7604 Configuration Manual

Configuring PFC3BXL and PFC3B Mode
Multiprotocol Label Switching
This chapter describes how to configure PFC3BXL and PFC3B mode Multiprotocol Label Switching
(MPLS) on a Cisco 7600 series router.
For complete syntax and usage information for the commands used in this chapter, refer to these
Note
publications:
•
•
This chapter consists of these sections:
•
•
•
For additional information (including configuration examples and troubleshooting information), see the
Tip
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html

PFC3BXL and PFC3B Mode MPLS Label Switching

These sections describe PFC3BXL and PFC3B mode MPLS label switching:
•
•
•
OL-4266-08
The Cisco IOS Master Command List, Release 12.2SX at this URL:
http://www.cisco.com/en/US/docs/ios/mcl/122sxmcl/12_2sx_mcl_book.html
The Release 12.2 publications at this URL:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_installation_and_configuratio
n_guides_list.html
PFC3BXL and PFC3B Mode MPLS Label Switching, page 24-1
PFC3BXL or PFC3B Mode VPN Switching, page 24-10
Any Transport over MPLS, page 24-13
Understanding MPLS, page 24-2
Understanding PFC3BXL and PFC3B Mode MPLS Label Switching, page 24-2
Supported Hardware Features, page 24-5
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
C H A P T E R
24
24-1