Cisco 7604 Configuration Manual page 778

Configuring PFC QoS Statistics Data Export
Table 43-2 Supported PFC QoS Data Export Facility Parameter Values (continued)
Name
lpr
news
uucp
Table 43-3
Table 43-3 Supported PFC QoS Data Export Severity Parameter Values
Severity Parameter
Name
emerg
alert
crit
err
warning 4
notice
info
debug
This example shows how to configure 172.20.52.3 as the destination host and syslog as the UDP port
number and verify the configuration:
Router# configure terminal
Router(config)# mls qos statistics-export destination 172.20.52.3 syslog
Router(config)# end
Router# show mls qos statistics-export info
QoS Statistics Data Export Status and Configuration information
---------------------------------------------------------------
Export Status : enabled
Export Interval : 250 seconds
Export Delimiter : |
Export Destination : 172.20.52.3, UDP port 514 Facility local6, Severity debug
QoS Statistics Data Export is enabled on following ports:
---------------------------------------------------------
FastEthernet5/24
QoS Statistics Data export is enabled on following shared aggregate policers:
-----------------------------------------------------------------------------
aggr1M
QoS Statistics Data Export is enabled on following class-maps:
---------------------------------------------------------------
class3
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
43-8
Definition
line printer subsytem
netnews subsytem
uucp subsystem
lists the supported PFC QoS data export severity parameter values.
Number Definition
0 system is unusable
1 action must be taken immediately
2 critical conditions
3 error conditions
warning conditions
5 normal but significant condition
6 informational
7 debug-level messages
Chapter 43 Configuring PFC QoS Statistics Data Export
Name Definition
local5 reserved for local use
local6 reserved for local use
local7 reserved for local use
OL-4266-08