Understanding How Power Management Works - Cisco 7604 Configuration Manual

Power Management and Environmental
Monitoring
This chapter describes the power management and environmental monitoring features in the Cisco 7600
series routers.
For complete syntax and usage information for the commands used in this chapter, refer to the Cisco IOS
Note
Master Command List, Release 12.2SX at this URL:
http://www.cisco.com/en/US/docs/ios/mcl/122sxmcl/12_2sx_mcl_book.html
This chapter consists of these sections:
Understanding How Power Management Works, page 54-1
•
Understanding How Environmental Monitoring Works, page 54-10
•
For additional information (including configuration examples and troubleshooting information), see the
Tip
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html

Understanding How Power Management Works

These sections describe power management in the Cisco 7600 series routers:
Enabling or Disabling Power Redundancy, page 54-2
•
• Powering Modules Off and On, page 54-3
Viewing System Power Status, page 54-4
•
• Power Cycling Modules, page 54-5
Determining System Power Requirements, page 54-5
•
Determining System Hardware Capacity, page 54-5
•
Determining Sensor Temperature Threshold, page 54-8
•
OL-4266-08
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
C H A P T E R
54
54-1