Configuring Ip Multicast Layer 3 Switching - Cisco NM-8B-U - HW ROUTERS L-M User Manual

Configuration Tasks
Configuring Power Management on the Interface
To manage the powering of the Cisco IP phones, use the following commands beginning in privileged
EXEC mode:
Command
Step 1
Router# configure terminal
Step 2
Router(config)# int fastethernet port/slot
Step 3
Router(config)# power inline
Verifying Power Management on the Interface
Use the show power inline command to verify the power configuration on the ports:
Step 1
Router# show power inline
PowerSupply
-----------
EXT-PS
Interface
---------
FastEthernet1/0
FastEthernet1/1
FastEthernet1/2
FastEthernet1/3
FastEthernet1/4
FastEthernet1/5
FastEthernet1/6
FastEthernet1/7
FastEthernet1/8
FastEthernet1/9
FastEthernet1/10
FastEthernet1/11
FastEthernet1/12
FastEthernet1/13
FastEthernet1/14
FastEthernet1/15

Configuring IP Multicast Layer 3 Switching

These sections describe how to configure IP multicast Layer 3 switching:
•
•
•
•
Cisco IOS Release 12.2(2)XT, 12.2(8)T, and 12.2(15)ZJ
98
16- and 36-Port Ethernet Switch Module for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series
{ |
auto never
SlotNum. Maximum
-------- -------
1 165.000
Config
------
auto
auto
auto
auto
auto
auto
auto
auto
auto
auto
auto
auto
auto
auto
auto
auto
Enabling IP Multicast Routing Globally, page 99
Enabling IP PIM on Layer 3 Interfaces, page 99
Verifying IP Multicast Layer 3 Hardware Switching Summary, page 100
Verifying the IP Multicast Routing Table, page 101
Purpose
Enters global configuration mode.
Selects a particular Fast Ethernet interface for
configuration.
}
Configures the port to supply inline power automatically to a
Cisco IP phone. Use never to permanently disable inline
power on the port.
Allocated Status
--------- ------
20.000 PS1 GOOD PS2 ABSENT
Phone Powered PowerAllocated
----- ------- --------------
no off 0.000 Watts
no off 0.000 Watts
no off 0.000 Watts
no off 0.000 Watts
unknown off 0.000 Watts
unknown off 0.000 Watts
unknown off 0.000 Watts
unknown off 0.000 Watts
unknown off 0.000 Watts
unknown off 0.000 Watts
unknown off 0.000 Watts
yes on 6.400 Watts
yes on 6.400 Watts
no off 0.000 Watts
unknown off 0.000 Watts
unknown off 0.000 Watts