Bor Drive Assembly Removal; Cartridge Contact Assembly Removal - Lexmark 13P0195 - C 750dn Color Laser Printer Service Manual

BOR drive assembly removal

See "BOR housing assembly with motor" on page 7-30
1.
Open the front cover.
2.
Remove the yellow toner cartridge.
3.
Remove the front right light shield cover.
4.
Remove the BOR housing assembly screw type
Note: Gear (B) can easily fall from the assembly. Be careful not to lose the gear.

Cartridge contact assembly removal

See "Cartridge contact assembly" on page 7-31
Warning: Do not remove the printhead unless instructed to do so.
1.
Open the front cover.
2.
Remove the toner cartridges.
3.
Remove the ITU assembly. See
4.
Set aside the top cover assembly. It is not necessary to totally remove it.See
removal" on page
5.
Remove the developer HVPS. See
It is not necessary to remove the entire assembly unless you are removing the black cartridge contact
assembly. If you are removing the yellow, cyan, or magenta cartridge contact assemblies, remove only the
large portion of the developer HVPS board.
"ITU assembly removal" on page
4-5.
"Developer HVPS board removal" on page
for the part number.
"323" (A) and remove the assembly.
for the part numbers.
4-37.
5060-00x
"Top cover assembly
4-28.
4-23
Repair information