Clearing jams
Jam locations
7
Finisher
•
Booklet finisher
•
Staple, hole punch finisher
Paper jam in the multipurpose feeder
1
Remove paper from the multipurpose feeder.
2
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
3
Open door C to remove any paper fragments.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a
hot component, allow the surface to cool before touching it.
Notes:
•
Make sure that the door does not hit any cable attached to the printer.
•
If a 3000‑sheet tray is installed, then slide the tray to the right to open the door.
4
Close the door.
5
Flex, fan, and align the paper edges before loading.
6
Reload paper.
Paper jam in door C
1
Open door C.
132