Next steps
1.
Install the OCP
shroud.
2. Follow the procedure listed in
System battery
This is a service technician replaceable part only.
Replacing the system battery
Prerequisites
WARNING:
There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only
with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the
manufacturer's instructions. See the Safety instructions that came with your system for more information.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. If required, move aside the cable that pass over the battery.
Steps
1. To remove the battery:
a. Use a plastic scribe to pry out the system battery.
94
Installing and removing system components
After working inside your
Safety
instructions.
Before working inside your
system.
system.