Port-Based Port Mirroring - HP ProLiant BL p-Class GbE2 Command Reference Manual

Port-Based Port Mirroring

Command: /cfg/pmirr/monport <port number>
[Port 1 Menu]
The following table describes the port-based Port Mirroring Configuration Menu options.
Table 6-20: Port Mirroring Configuration Menu
Command
add <mirrored port (port to mirror from)>
<direction (in, out, or both)>
rem <mirrored port (port to mirror from)>
delete
cur
HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide
HP CONFIDENTIAL Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 12:57 PM
add - Add "Mirrored" port
rem - Rem "Mirrored" port
delete - Delete this "Monitor" port
cur - Display current Port-based Port Mirroring configuration
The Configuration Menu
Description
Adds the port to be mirrored. This
command also allows you to enter the
direction of the traffic. It is necessary to
specify the direction because:
•
If the source port of the frame
matches the mirrored port and the
mirrored direction is ingress or both
(ingress and egress), the frame is
sent to the mirrored port.
•
If the destination port of the frame
matches the mirrored port and the
mirrored direction is egress or both,
the frame is sent to the monitoring
port.
Removes the mirrored port.
Delete this monitored port.
Displays the current settings of the
monitoring port.
6-25