Https Access Configuration - HP 10GB ETHERNET BL-C SWITCH BMD00022 Command Reference Manual

Table 98
User ID Configuration menu options
Command
ena
dis
del
cur

HTTPS Access configuration

Command: /cfg/sys/access/https
[https Menu]
The following table describes the HTTPS Access Configuration Menu options.
Table 99
HTTPS Access Configuration Menu options
Command
access enable|disable
port <TCP port number>
generate
certSave
cur
Description
Enables the user ID.
Disables the user ID.
Deletes the user ID.
Displays the current user ID parameters.
access - Enable/Disable HTTPS Web access
port - HTTPS WebServer port number
generate - Generate self-signed HTTPS server certificate
certSave - save HTTPS certificate
cur - Display current SSL Web Access configuration
Description
Enables or disables BBI access (Web access) using HTTPS. The default value is
disabled.
Defines the HTTPS Web server port number.
Allows you to generate a certificate to connect to the SSL to be used during
the key exchange. A default certificate is created when HTTPS is enabled for
the first time. The user can create a new certificate defining the information
that they want to be used in the various fields. For example:
•
Country Name (2 letter code) [ ]: CA
•
State or Province Name (full name) [ ]: Ontario
•
Locality Name (for example, city) [ ]: Ottawa
•
Organization Name (for example, company) [ ]: Hewlett-Packard
•
Organizational Unit Name (for example, section) [ ]: ProLiant
•
Common Name (for example, user's name) [ ]: Mr Smith
•
Email (for example, email address) [ ]: info@hp.com
You must confirm if you want to generate the certificate. It takes approximately
30 seconds to generate the certificate. Then the switch restarts SSL agent.
Allows the client, or the Web browser, to accept the certificate and save the
certificate to Flash to be used when the switch is rebooted.
Displays the current SSL Web Access configuration.
Configuration Menu 130