Https Access Configuration; Port Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

HTTPS Access configuration

Command: /cfg/sys/access/https
[https Menu]
access
port
generate - Generate self-signed HTTPS server certificate
certSave - save HTTPS certificate
cur
The following table describes the HTTPS Access Configuration Menu options.
Table 98 HTTPS Access Configuration Menu options
Command
access enable|disable
port <TCP port number>
generate
certSave
cur

Port configuration

Command:
/cfg/port <port number>
[Port 1 Menu]
gig
aclqos
8021ppri - Set default 802.1p priority
pvid
name
rmon
tag
tagpvid
media
fiber
copper
automedia - Set Auto
brate
mrate
drate
ena
dis
cur
This menu enables you to configure settings for individual switch ports. This command is enabled by default.
NOTE: Port 19 is reserved for switch management.
The following table describes the Port Configuration Menu options.
- Enable/Disable HTTPS Web access
- HTTPS WebServer port number
- Display current SSL Web Access configuration
Description
Enables or disables BBI access (Web access) using HTTPS. The default value is
.
disabled
Defines the HTTPS Web server port number.
Allows you to generate a certificate to connect to the SSL to be used during the key
exchange. A default certificate is created when HTTPS is enabled for the first time. The
user can create a new certificate defining the information that they want to be used in
the various fields. For example:
Country Name (2 letter code) [ ]: CA
State or Province Name (full name) [ ]: Ontario
Locality Name (for example, city) [ ]: Ottawa
Organization Name (for example, company) [ ]: Hewlett-Packard
Organizational Unit Name (for example, section) [ ]: ProLiant
Common Name (for example, user's name) [ ]: Mr Smith
Email (for example, email address) [ ]: info@hp.com
You must confirm if you want to generate the certificate. It takes approximately
30 seconds to generate the certificate. Then the switch restarts SSL agent.
Allows the client, or the Web browser, to accept the certificate and save the certificate
to Flash to be used when the switch is rebooted.
Displays the current SSL Web Access configuration.
- Gig Phy Menu
- Acl/Qos Configuration Menu
- Set default port VLAN id
- Set port name
- Enable/Disable RMON for port
- Enable/disable VLAN tagging for port
- Enable/disable tagging on pvid
- Current media copper/fiber
- Set fiber
- Set copper
- Set BroadCast Threshold
- Set MultiCast Threshold
- Set Dest. Lookup Fail Threshold
- Enable port
- Disable port
- Display current port configuration
Configuration Menu 106