Snmpv3 Target Address Table Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

Table 90 SNMPv3 Community Table Configuration Menu options
Command
tag <1-255 characters>
del
cur

SNMPv3 Target Address Table configuration

Command: /cfg/sys/ssnmp/snmpv3/taddr
[SNMPv3 snmpTargetAddrTable 1
This menu allows you to set passwords and display current user statistics. Passwords can be a maximum
of 15 characters. To disable a user, set the password to null by simply pressing the Enter key when
prompted for the password.
The following table describes the SNMPv3 Target Address Table Configuration Menu options.
Table 91 SNMPv3 Target Address Table Configuration Menu options
Command
name <1-32 characters>
addr <transport address ip>
port <transport address port
(1-65535)>
taglist <1-255 characters>
pname <1-32 characters>
del
cur
Description
Configures a tag of up to 255 characters maximum. This tag specifies a set of
transport endpoints to which a command responder application sends an SNMP
trap.
Deletes the community table entry.
Displays the community table configuration.
name - Set target address name
addr - Set target transport address IP
port - Set target transport address port
taglist - Set tag list
pname - Set targetParams name
del - Delete targetAddrTable entry
cur - Display current targetAddrTable configuration
Description
Configures the locally arbitrary, but unique identifier, target address name
associated with this entry.
Configures a transport address IP that can be used in the generation of
SNMP traps.
Configures a transport address port that can be used in the generation of
SNMP traps.
Configures a list of tags (up to 255 characters maximum) that are used to
select target addresses for a particular operation.
Defines the name as defined in
/cfg/sys/ssnmp/snmpv3/tparam/name.
Deletes the Target Address Table entry.
Displays the current Target Address Table configuration.
Menu]
Configuration Menu
127