Snmpv3 Target Address Table Configuration; Snmpv3 Target Parameters Table Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

SNMPv3 Target Address Table configuration

Command: /cfg/sys/ssnmp/snmpv3/taddr
[SNMPv3 snmpTargetAddrTable 1
name
addr
port
taglist
pname
del
cur
This menu allows you to set passwords and display current user statistics. Passwords can be a maximum of 15
characters. To disable a user, set the password to null by simply pressing the Enter key when prompted for the
password.
The following table describes the SNMPv3 Target Address Table Configuration Menu options.
Table 91 SNMPv3 Target Address Table Configuration Menu options
Command
name <1-32
characters>
addr <transport
address ip>
port <transport
address port>
taglist <1-255
characters>
pname <1-32
characters>
del
cur

SNMPv3 Target Parameters Table configuration

Command: /cfg/sys/ssnmp/snmpv3/tparam
[SNMPv3 snmpTargetParamsTable 1
name
mpmodel
model
uname
level
del
cur
You can configure the target parameters entry and store it in the target parameters table in the SNMP engine. This
table contains parameters that are used to generate a message. The parameters include the message processing
model (for example: SNMPv3, SNMPv2c, SNMPv1), the security model (for example: USM), the security name, and
the security level (noAuthnoPriv, authNoPriv, or authPriv).
Menu]
- Set target address name
- Set target transport address IP
- Set target transport address port
- Set tag list
- Set targetParams name
- Delete targetAddrTable entry
- Display current targetAddrTable configuration
Description
Configures the locally arbitrary, but unique identifier, target address name associated with
this entry.
Configures a transport address IP that can be used in the generation of SNMP traps.
Configures a transport address port that can be used in the generation of SNMP traps.
Configures a list of tags (up to 255 characters maximum) that are used to select target
addresses for a particular operation.
Defines the name as defined in /cfg/sys/ssnmp/snmpv3/tparam/name.
Deletes the Target Address Table entry.
Displays the current Target Address Table configuration.
Menu]
- Set targetParams name
- Set message processing model
- Set security model
- Set USM user name
- Set minimum level of security
- Delete targetParamsTable entry
- Display current targetParamsTable configuration
Configuration Menu 102