Interface Setup - Canon imagePROGRAF iPF5100 User Manual

Interface Setup

Setting Item
EOP Timer
TCP/IP IP Mode
Protocol
IP Setting
NetWare NetWare
Frame Type
Print Service
AppleTalk
Ethernet Auto Detect
Driver
Comm.Mode
Ethernet Type
Spanning
Tree
MAC Address
Return
Defaults
Specify the timeout period for print jobs.
Choose whether the printer IP address is congured
automatically or a static IP address is entered manually.
DHCP Specify the protocol used to congure the IP address
automatically.
BOOTP
RARP
IP Address Specify the printer network information when using a
static IP address.
Subnet Mask
Enter the IP address assigned to the printer, as well as
the network subnet mask and default gateway.
Default G/W
Specify the NetWare protocol. To apply your changes,
choose Store Setting .
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol. To apply
your changes, choose Store Setting .
Specify the communication method. To apply your
changes, choose Store Setting .
Choose On for automatic conguration of the LAN
communication protocol. Choose Off to use settings
values of Comm.Mode and Ethernet Type .
Choose the LAN communication method.
Choose the LAN transfer rate.
Choose whether spanning-tree packets are supported
over the LAN.
Displays the MAC address.
▼ A conrmation message is displayed if you press
the [icon] button. Choose OK to restore the network
settings to the default values.
Description, Instructions
Control Panel
Printer Parts 53