Important
•
Do not touch the Linear Scale (a) or Carriage Shaft (b). This may stain your hands and damage
the printer.
•
If paper is jammed in the back of the printer
1.
While squeezing the two levers (a) at two positions on the Back Cover, remove the cover
from the printer.
2.
Remove the jammed paper from the back.
After removing the paper, make sure there are no other scraps of paper in the printer.
Handling sheets
Handling Paper 177
Need help?
Do you have a question about the imagePROGRAF iPF5100 and is the answer not in the manual?