Canon imagePROGRAF iPF5100 User Manual page 706

Cannot print over a network
8.
Press ◄ or ► to select Ethernet Type, and then press ▼.
9.
Press ◄ or ► to select the Ethernet type, and then press OK.
The setting is updated, and an equals sign "=" is displayed at left.
Return to the Ethernet Driver menu.
10.
Press ◄ or ► to select Spanning Tree, and then press ▼.
11.
Press ◄ or ► to enable or disable spanning tree support, and then press OK.
The setting is updated, and an equals sign "=" is displayed at left.
Return to the Ethernet Driver menu.
12.
Press the Online button.
After the conrmation message is displayed, press OK.
The printer will now restart.
Note
•
If an error message is displayed, check the settings and correct any invalid values.
•
To cancel the setup process, hold down the Stop/Eject button for a second or more.
692 Troubleshooting
Ethernet Driver
Ethernet Type ↓
Ethernet Type
= 10 Base-T
Ethernet Driver
Spanning Tree ↓
Spanning Tree
= Use