Excessv Temp/Hu / Press Ok/Stop; Press Ok And Recalibrate - Canon imagePROGRAF iPF5100 User Manual

Excessv Temp/Hu / Press OK/Stop

The temperature or humidity where the printer is
installed is out of the acceptable range for printer
operation.

Press OK and recalibrate

The paper for printing a test pattern for adjustment is
soiled. Otherwise, colored paper is loaded.
The printed test pattern is faint.
Direct sunlight or strong lighting may be shining on
the printer and causing the sensor to malfunction.
Cause
Cause
Messages regarding printing or adjusment
Corrective Action
Press the Stop/Eject button and stop printing.
Use the printer in an environment that meets the
requirements for the operating environment. Note
that various environmental conditions are also
recommended for various types of paper. For details
on the recommended environmental conditions for
paper, see Paper Reference Guide ." (→P.107)
Press the OK button and complete color calibration.
However, calibration may not be completed
successfully.
Corrective Action
Load unused paper compatible with color calibration.
(→P.107)
Take steps to remedy the faint printing.
(→P.697)
Take steps to ensure the printer is not used when
exposed to direct sunlight or strong lighting.
Error Message 755